YAMAHA BIG BEAR 2007+ (All Submodels)
REAR ADJUSTABLE SWAY BAR LINKS WITH QUICK DISCONNECT PIN
This is our adjustable Sway Bar Link for the rear of the Yamaha Big Bear! This works on all years and models of the Big Bear. These also come with a quick disconnect clevis pin! Every sway bar kit comes with the 2 quick disconnect pins, you dont need to order it seperately! These Sway Bar Links come in a PAIR. Quick disconnect pin is a 10mm clevis pin held in with a quick pin and rubber washers to hold tension and keep the pin tight. Just pull the pin swing the link over and zip tie it out of the way!!
**THIS KIT GIVES YOU THE OPTION TO HARD MOUNT BOTH SIDES WITH BOLTS. OR USE THE SUPPLIED QUICK DISCONNECT PIN!!**
These links are made with 5/8” Chromoly Rod Ends that are Teflon lined for longevity! The 5/8” rod end will give you a tremendous amount strength more than the tiny stock link. Rod ends are Teflon lined to reduce play & increase the length of the life of the rod end!
Our kit uses an actual bolt instead of a stud which is much easier to remove and install. Bolts are high quality M10 Grade 10.9 paired with hardened high carbon washers and all metal top locking nuts, to insure the hardware never comes loose!